top of page

PAST WEBINARS

Please scroll down to check all BlueSkyPlan past webinars

bec0e9c9-05b3-b303-09d8-2bb5a2c5857b.png
BlueSkyBio Webinar Presenter

Dr. John C. Flucke

BlueSkyBio Webinar Presenter

Endodontics from Treatment to Restoration

November 20 2024, 7:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

70

Course Description

The object of this webinar is to learn predictable endodontics and effective restoration of endodontically treated teeth.

Over 85% of endodontic procedures are performed by general dentists. Yet many practitioners struggle with their technique. Doctors need an efficient and predictable way to perform every day root canals. However, endodontics is only one piece of the puzzle. The other is how to predictably restore teeth to function so that the patient can continue to function properly and effectively for years to come.

In this webinar Dr. John Flucke will go over endodontic instrumentation, obturation, and restoration in a way that makes things simple for the general dentist. Join Dr. Flucke and learn a way to take your endodontic cases from start to completed restoration with a minimum of stress.

The object of this webinar presentation are...
1. Effective and efficient instrumentation
2. Irrigation protocols
3. Proper post placement and technique

About Presenter

Dr. John Flucke is in private practice in Lee’s Summit, Missouri where he spends two days per week in direct patient care.
He also serves as Chief Dental Editor as well as Technology Editor for Dental Products Report magazine where he writes, edits, and does video “Test Drives” of products featured in his “Technology Evangelist’ columns.
He consults with manufacturers helping with development of techniques, technologies, and products which allows him to see things from the “duct tape and zip tie stage” all the way through to the completed item.

Dr. Flucke’s passion is “Technology that Improves Patient Outcomes” and he is always working to create or to help create products and techniques that allow patients a better quality of life.

Dr. Flucke provides expert witness testimony in dental litigation.

He is a past president of the Greater Kansas City Dental Society as well as served as the Missouri State Peer Review Chairman for over 20 years.

BlueSkyBio Webinar Presenter

Mr. Gory L. M. Cottinini

BlueSkyBio Webinar Presenter

Safe, Accurate, Predictable, Comfortable IPR with DentaSonic

November 12 2024, 7:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

370

Course Description

The object of this webinar is to learn advanced technology for optimal orthodontic treatment results.

In the last 20 years there has been a major development in the use of clear aligners and functional concepts applied to orthodontic treatments, both on children and adult patients guiding clinicians around the world to train and evolve professionally on the use of the new technologies.
This also applies in aesthetics and in prosthetics.
The key element is interproximal enamel reduction, a fundamental practice to recover the interproximal space in order to facilitate teeth movement in orthodontic treatments and to insure clean and accurate procedures in Class II patients especially dealing in the posterior sectors.

About Presenter

Mr. Gory L. M. Cottinini
, been in dental industry for 12 years, has achieved a great knowledge on real patient needs and main shortcomings present today on the market; introducing new manufacturing and distribution processes, delivering specific Clinical trainings, of several dental products including IPR strips.
Gory lives in Milan, but spends most of his time traveling between Europe and North America where he manages a distribution company and consults in export and development, specifically chosen other companies, supporting their growth.
In addition to his extensive experience in the dental industry, Gory is also passionate about education and training. He regularly conducts clinical trainings on various dental products, including IPR strips, to help other dental professionals improve their skills and knowledge.
With his global perspective and specialized knowledge, Gory is a valuable asset to the dental community. His presence at dental congresses and exhibitions around the world ensures that he continues to be at the forefront of industry trends and advancements, helping to shape the future of dental care.

BlueSkyBio Webinar Presenter

Dr. Scott D Ganz

BlueSkyBio Webinar Presenter

Management of Malpositioned Dental Implants: Achieving Successful Outcomes through Advanced Diagnosis and Treatment Planning

Jun 13, 2023 1:00 PM Eastern Time

Course Duration: 1 hour

AGD Subject Code:

690

Course Description

The purpose of this presentation is to educate clinicians on the use of advanced software applications for the diagnosis, treatment planning, and fabrication of surgical guides to manage malpositioned implants through clinical examples.

Objectives:
To demonstrate the importance of 3-D imaging, proper diagnosis and treatment planning concepts to avoid complications
To demonstrate how to evaluate and manage malpositioned implants and to plan successful revisions.
To demonstrate the use of 3-D printing for the fabrication of advanced surgical guides.

About Presenter

Dr. Ganz is well-published in many scientific journals (over 125 articles) and has contributed to 20 professional textbooks. He continues to deliver presentations both nationally and internationally as a featured speaker on the Prosthetic and Surgical phases of Implant Dentistry, and is considered one of the world's leading experts in the field of Computer Utilization for Diagnostic, Interactive Treatment Planning, Digital Workflows, CBCT 3-D imaging, and CAD CAM Applications in Dentistry. He has been a featured speaker for most major dental organizations including the Academy of Osseointegration (AO), the American Academy of Oral and Maxillofacial Surgeons (AAOMS), American College of Prosthodontists (ACP), International Congress of Oral Implantologists (ICOI), American Academy of Implant Dentistry (AAID), the European Academy of Osseointegration (EAO), Greater New York Dental Meeting, Digital Dental Society (DDS), and many more. Dr. Ganz currently serves as Editor-n-Chief of “digital” International Magazine of Dental Tribune International, and serves on the editorial staff of several other publications.

BlueSkyBio Webinar Presenter

Dr. Rick Ferguson

BlueSkyBio Webinar Presenter

Prosthetically Driven Surgical Guide planning with Blue Sky Plan using Face Scans and Third Party Digital Smile Design

May 9, 2023 1:00 PM Eastern Time

Course Duration: 1 hour

AGD Subject Code:

750

Course Description

The goal of this webinar is to explore the use of 3D face scanning in the plannig of full arch implant surgical guides and restorations. By combining a 3D face scan the clinician can better visualize the desired outcome and adjust the plan accordingly. Better clinicial decisions can be made relating to implant position, any necessary bone reduction, lip support and esthectic concerns. Several face scanning products in diferent price ranges and quality will be compared with the pros and cons of each. Merging of the face scan with the CBCT and IOS data will be demonstrated as well as a discussion of the accuracy necessary based on the desired outcome and use.

About Presenter

Dr. Rick Ferguson has been involved in teaching implant dentistry for the last 25 years and has lectured in every major city in the United States as well as internationally in Saudi Arabia, UK, India, Argentina, Taiwan, South Korea, Jamaica, Antigua, China and the Bahamas. These lecture topics have included treatment planning, case selection, simple and complex surgical placement and restoration, advanced bone grafting and bone graft materials, use of Computed Tomography and surgical guides, hygienic maintenance, management of complications and failures. Dr. Ferguson has placed and restored over 6000 dental implants and maintains a private practice with his wife Dr. Katherine Ferguson in FL emphasizing dental implants and where they also run an annual live surgery Implant Continuum with the University of Florida. Dr. Ferguson is a Diplomate of the American Board of Oral Implantology/ Implant Dentistry and Diplomate of the ICOI.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Using Automatically CT Segmented Teeth for Improved Clinical Implant Planning

May 9, 2023 1:00 PM Eastern Time

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

The goal of the webinar presentation is to provide dentists with a unique opportunity to learn how to use automatically CT segmented teeth for improved clinical implant planning. By attending this free dental webinar, dentists can gain valuable insights on how to optimize their implant placement procedures through additional information and insights provided via segmented teeth in the treatment plan, resulting in better outcomes for their patients. Dr. Mikhli's expertise and practical tips can help dentists improve their level of patient care and enhance their clinical implant planning skills, ultimately benefiting their practice and the quality of care they provide to their patients.

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY. He followed that with a residency in general practice dentistry at New York Hospital of Queens and a fellowship in oral and maxillofacial surgery and implantology, also at New York Hospital of Queens. The fellowship program provided Dr. Mikhli with extensive training in both the surgical and prosthetic aspects of implant dentistry. In addition to working in private practice, Dr. Mikhli is a recognized expert in implantology, who lectures extensively on the topic to other dental professionals throughout the Tri-state area. He also runs an in-office mentorship program for general dentists, providing hands-on instruction in implant surgery. Dr. Mikhli is a member of the American Dental Association, the Academy of General Dentistry and the International Congress of Oral Implantologist.

BlueSkyBio Webinar Presenter

Dr. Cory Glenn

BlueSkyBio Webinar Presenter

Improving Implant Treatment Planning and Surgical Guide Manufacturing BlueSkyPlan's Completely Automated Bone Segmentation.

May 2 2023, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

The goal of this webinar is to provide dentists with valuable insights into improving their implant treatment planning and surgical guide manufacturing skills using BlueSkyPlan's Completely Automated Bone Segmentation. By attending this free webinar, dentists can learn how to use cutting-edge technology to accurately plan and execute implant procedures, resulting in better patient outcomes and increased success rates. Dr. Cory Glenn will share his expertise and experience, discussing the importance of precise planning and providing practical tips and strategies for successful implant placement. Attendees can expect to gain a deeper understanding of implant treatment planning, learn about the latest advancements in surgical guide manufacturing, and enhance their dental skills to provide more effective and efficient care to their patients.

About Presenter

Hi, my name is Cory Glenn. I’m a dentist, speaker, trainer and tech developer. I live in Winchester, TN where I practiced dentistry for 8 years. During that time, I became known as the “Dental MacGyver” for coming up with creative ways to deliver care more affordably and efficiently. However, in 2015, I developed APL leukemia and had to go on medical leave for treatment. After a year long battle, I made a near full recovery with exception of ongoing back issues that have kept me from being able to return to clinical practice. Now that I am a “dry fingered” dentist, I’ve shifted my focus entirely to teaching and development in the field of digital dentistry. I am the VP of Technology for Blue Sky Bio, a leading implant and software company. I work with an awesome group of people and we are disrupting the dental field by using technology to make dentistry more affordable and efficient. I speak extensively on digital dentistry throughout the world and I also operate a training center in my hometown where I teach other dentists digital workflows and techniques.

BlueSkyBio Webinar Presenter

Mr. Michael Saltzman

BlueSkyBio Webinar Presenter

Artificial Intelligence in Dentistry and BlueSkyPlan and How It Can Help Your Practice

April 18 2023, 12:30 PM

Course Duration: 1 hour

AGD Subject Code:

10

Course Description

The objective of this course is to:
• Introduce how Artificial Intelligence is being used in dentistry.
• Present Artificial Intelligence solutions already existing in BlueSkyPlan.
• Discuss new solutions currently being added and additional solutions that are currently being worked on.
• Explain how artificial intelligence solutions can benefit you and your practice

About Presenter

Michael Saltzman is the Director of Digital Products at BlueSkyBio, a leading provider of dental implant products and cutting edge digital dental solutions. With over 17 years of experience in the dentistry industry, Michael has extensive knowledge of digital dentistry and has been instrumental in developing innovative products and solutions for BlueSkyBio. In his current role, he is responsible for overseeing the development of digital products and ensuring that they meet the needs of dental professionals worldwide.

BlueSkyBio Webinar Presenter

Dr. Baron Grutter

BlueSkyBio Webinar Presenter

Clinical Orthodontic Planning Using Segmented CT Teeth and Other New BlueSkyPlan Features

March 28 2023, 12:30 PM

Course Description

The goal of Dr. Baron Grutter's upcoming webinar is to educate dentists on the use of new BlueSkyPlan features for clinical orthodontic planning. Specifically, the webinar will cover the use of segmented CT teeth in orthodontic treatment planning and how it can improve the accuracy and precision of treatment planning. Attendees of the free webinar will learn about the benefits and limitations of using segmented CT teeth, how to use the BlueSkyPlan software to segment teeth, and how to incorporate this information into their orthodontic treatment planning. Additionally, the webinar will cover other new BlueSkyPlan features relevant to orthodontic planning, providing dentists with a comprehensive understanding of the software's capabilities.

About Presenter

Dr. Baron Grutter attended Graceland University for his undergraduate degree and received his dental degree from the University of Missouri in Kansas City. He has focused his practice around digital dentistry, particularly in the areas of Orthodontics, Implantology, and Cosmetics. Most recently, he was named the project manager of Blue Sky Bio Orthodontics. He spends much of his non-clinical hours refining digital workflows to optimize treatment outcomes and efficiency. You can find many of his free educational videos by following him on YouTube (YouTube.com/BGrutterDDS). He also hosts courses on Digital Dentistry, including: Digital Orthodontics, Guided Surgery, and 3D Printing in Dentistry. He has a true passion for working with and helping his colleagues to master all that digital technologies have to offer the dental field.

BlueSkyBio Webinar Presenter

Dr. Russell Schafer

BlueSkyBio Webinar Presenter

3D Printed Immediate Dentures

March 21 2023, 12:30 PM

Course Duration: 1 hour

AGD Subject Code:

670

CE: 1

Course Description

The learning objectives are
1) Benefits of immediate printed dentures
2) Benefits of printed dentures after one month of healing
3) Design and fabrication of printed dentures using immediate dentures.

About Presenter

Dr. Russell Schafer is a general dentist who practices in New Orleans, LA and focuses on removable prosthodontics. He is the owner and dentist at NOLA Dentures and General Dentistry and has fix quite a few mouths using removable dentures. He has a love of the subject and enjoys teaching fellow dentists about dentures. Dr. Schafer also enjoys doing digital design and printing and is fluent with blue sky bio, meshmixer, and many other CAD programs. Also Dr. Schafer currently owns four 3D printers: Moonray S, NextDent 5100, Arfona R.Pod, and a Prusa i3.


Dr. Schafer is a native New Orleanian and is an engineer turned dentist. He got his Bachelors in Mechanical Engineering from Rice University in 2007 and his Masters of Mechanical Engineering from Rice in 2008. He worked in the petroleum industry before going onto dental school. He is a graduate of LSU Dental School 2013. He and his wife, Alison, a house with a Doberman named Lucas and a cat named Charming.

BlueSkyBio Webinar Presenter

Dr. Scott Kanas

BlueSkyBio Webinar Presenter

Remote Patient Monitoring as A Clinical Tool

March 14 2023, 12:30 PM

Course Duration: 1 hour

AGD Subject Code:

370

CE: 1

Course Description

The goal of this webinar presentation is to explain how remote patient monitoring is used in my clinic to improve the standard of patient care while reducing overhead and chair time. By attending this webinar you
will learn practical insights how you can incorporate remote patient monitoring into your practice workflows.

About Presenter

Dr. Scott Kanas was born and raised in Rochester Hills, Michigan. He graduated summa cum laude and was awarded his bachelor of science in Biochemistry from the University of Detroit Mercy. From there, Dr. Kanas continued on to earn his Doctorate of Dental Surgery from the University of Detroit Mercy. He graduated at the top of his dental class and was inducted into the prestigious Omicron Kappa Upsilon dental honor society. Finally, he went on to specialize, where he earned his Masters of Dental Science and Certificate in Orthodontics from Rutgers School of Dental Medicine. During his senior year, he was appointed Chief resident, and he was awarded as a 2018 Eugene L. Gottlieb Journal of Clinical Orthodontics Student of the Year Finalist.


In addition to his educational background, Dr. Kanas is also an active member of the American Association of Orthodontists, Michigan Dental Association and American Dental Association. This allows him to have access to conferences, seminars and orthodontic publications in order to stay up to date with his specialty. Dr. Kanas loves the orthodontic profession. The orthodontic profession allows him to change the lives of his patients by giving them confidence, a sense of attractiveness and being happier, all with a knockout smile. His primary focus is to provide quality orthodontic treatment, and to develop relationships with his patients. He has a wide range of proficiency in many cutting-edge treatment techniques such as temporary anchorage devices, soft tissue lasers, multiple functional appliances, virtual appointments and all brands of clear aligners.


Away from his profession, Dr. Kanas and his wife, Malinda, love to spend time with their son, Oliver, and their three dogs, Stoick, Sven and Charlie. Growing up in Michigan, he has been an avid Detroit sports fan. You may even catch him at some home games! His favorite sports are basketball and ice hockey, so when he has the chance, he loves to play. Some of his other hobbies. Some of his other hobbies include boating, snowboarding and golf.

BlueSkyBio Webinar Presenter

Dr. Ben Kellum

BlueSkyBio Webinar Presenter

Digital Dentures Using Blue Sky Plan: Clinical steps, Design, and Manufacturing

April 26 2022, 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The object of this webinar presentation is to discuss the different ways in which to accomplish a digital denture. We will first discuss traditional analog processes and workflows compared to digital processes. We will then discuss data acquisition and clinical steps for a digital denture process. I will demonstrate design of a monolithic try in and a two piece denture with a pink base and tooth shaded teeth. Finally we will discuss the different manufacturing options and the pros and cons of each.

About Presenter

Dr. Ben Kellum grew up in Tupelo, Mississippi. After graduating from Lipscomb University in Nashville, TN, he went on to get his Doctorate in Dental Surgery from the University of Oklahoma. Dr. Kellum completed a 1 Year AEGD residency program in Pocatello, Idaho focused on comprehensive implant planning and treatment. Dr. Kellum spent several years in private practice at a full arch denture and implant clinic and then transitioned full-time to Program Director of The Foundry Dental AEGD residency Program in Birmingham Alabama. Dr. Kellum now is Co-owner of Transcend Dental Education, a CE facility in Huntsville Alabama, and Transcend Digital Dental Lab, a digital lab focused on design and fabrication of surgical guides, full arch guides and restorations, and digital dentures.

BlueSkyBio Webinar Presenter

Dr. Virgil Mongalo

BlueSkyBio Webinar Presenter

Tips and Tricks on Full Arch Immediate Load Cases

April 6 2022, 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The objective of this webinar presentation is to present and discuss common mistakes that can occur during Full Arch Immediate Load Cases and how to avoid them.

About Presenter

Dr. Virgil Mongalo
DMD, DICOI, MAAIP, FICD

Professional experience
Dr. Virgil Mongalo is a pioneer in the field of implant dentistry, having placed over 20,000 implants since opening his private office in South Florida in 1991. He is passionate about replacing lost teeth and giving patients back a beautiful smile. He holds active licenses in Massachusetts, Colorado, Florida and Nicaragua. Dr. Mongalo spends his professional time travelling to Nicaragua and Mexico where he trains USA and Canadian dentists how to perform implant surgeries on under privileged population as part of a Catholic Dental outreach program.

BlueSkyBio Webinar Presenter

Dr. Baron Grutter

BlueSkyBio Webinar Presenter

Orthodontic Aligner Case Planning with BlueSkyPlan

March 30 2022, 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The objective of this webinar is to demonstrate the digital process flow for Clear Aligner case design using the BlueSkyPlan software. Attendees will learn how they can plan their own orthodontic aligner cases and manufacture the aligners completely in house.

About Presenter

Dr. Baron Grutter attended Graceland University for his undergraduate degree and received his dental degree from the University of Missouri in Kansas City. He has focused his practice around digital dentistry, particularly in the areas of Orthodontics, Implantology, and Cosmetics. Most recently, he was named the project manager of Blue Sky Bio Orthodontics. He spends much of his non-clinical hours refining digital workflows to optimize treatment outcomes and efficiency. You can find many of his free educational videos by following him on YouTube (YouTube.com/BGrutterDDS). He also hosts courses on Digital Dentistry, including: Digital Orthodontics, Guided Surgery, and 3D Printing in Dentistry. He has a true passion for working with and helping his colleagues to master all that digital technologies have to offer the dental field. www.barongrutterdds.com

BlueSkyBio Webinar Presenter

Dr. Cory Glenn

BlueSkyBio Webinar Presenter

Advanced Techniques in Blue Sky Plan

March 23 2022, 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The object of this webinar is:

Explore complex surgical guide designs in Blue Sky Plan and Meshmixer
Learn to make bone reduction guides
Learn how to generate timing marks for precisely positioning angled implants
Techniques for making zygomatic implant guides
Explore how AI driven bone segmentation simplifies the process of bone supported guides
Show how blue sky plan can be used to generate custom grafting meshes that can be printed or milled.
Learn to make immediate load prosthetics in BSB and the principles of "full arch healing abutment" technique.

About Presenter

Hi, my name is Cory Glenn. I’m a dentist, speaker, trainer and tech developer. I live in Winchester, TN where I practiced dentistry for 8 years. During that time, I became known as the “Dental MacGyver” for coming up with creative ways to deliver care more affordably and efficiently. However, in 2015, I developed APL leukemia and had to go on medical leave for treatment. After a year long battle, I made a near full recovery with exception of ongoing back issues that have kept me from being able to return to clinical practice. Now that I am a “dry fingered” dentist, I’ve shifted my focus entirely to teaching and development in the field of digital dentistry. I am the VP of Technology for Blue Sky Bio, a leading implant and software company. I work with an awesome group of people and we are disrupting the dental field by using technology to make dentistry more affordable and efficient. I speak extensively on digital dentistry throughout the world and I also operate a training center in my hometown where I teach other dentists digital workflows and techniques.

BlueSkyBio Webinar Presenter

Dr. Bryan Kariya

BlueSkyBio Webinar Presenter

Crown and Bridge Workflows with Blue Sky Plan

March 9, 2022 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

Talk about what equipment you need to get started in digital dentistry
Integrate intra oral scanning into Blue Sky Plan
See how to navigate the basic functions of Blue Sky Plan
Learn how to use Blue Sky Plan to fabricate single tooth crowns and bridges
Understand how to export the digital file to print or mill your restoration.

About Presenter

Dr. Bryan Kariya grew up in Kaysville, UT and attended Brigham Young University for undergraduate studies, where he was a running back on the football team from 2008-2011. Following undergrad, he attended the University of Oklahoma College of Dentistry for his dental training. Upon graduation, Dr. Kariya worked in private practice in Nevada, Utah, and Oklahoma where he gained a variety of experience and found a passion for digital dentistry.

BlueSkyBio Webinar Presenter

Dr. Rick Ferguson

BlueSkyBio Webinar Presenter

Dental 3D Printing and BlueSkyPlan in 2022 - Use Parameters for Dental 3D printers and the Role of BlueSkyPlan

March 2, 2022 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

Dental 3D printing has evolved quickly in recent years with a plethora of very good cost effective 3D printers now readily available. The use applications for 3D printing in dentistry will be explored as well as the pros and cons of the various technologies and materials. Printing, post processing and clinical uses will be covered.

About Presenter

Dr. Rick Ferguson
DMD, DABOI, DICOI
@Implant Educators Academy Rick Ferguson lectures throughout the world on a variety of implant surgery and restorative topics. He is the Director of Implant Educators which runs a seven month program teaching general dentists and specialists how to become implantologists. Dr. Ferguson is a Diplomate of the ABOI/ID, Diplomate of the ICOI, an Associate Fellow of the AAID, clinical assistant professor at the University of Florida and a visiting lecturer at the University of Miami. Dr. Ferguson has taught implant dentistry and hands-on bone grafting courses which have been attended by thousands of dentists over the last 20 years. He is currently in private practice in Davie, Florida.

BlueSkyBio Webinar Presenter

Dr. Raymond Rophie

BlueSkyBio Webinar Presenter

Full Restorative-Surgical Workflow. From Surgical Guide to Restoration

February 23, 2022 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The object of this webinar presentation is to present the complete BlueSkyPlan workflow in an easy to understand sequential manner, to create a surgical guide, a custom healing abutment, a temporary and an articulated model using the different tools in the BlueSkyPlan software

About Presenter

Dr. Raymond Rophie
BlueSkyBio CADCAM Director. CADCAM2U Digital Dental Lab
Graduated as general dentist in Mexico City 2006, run private practice until 2016 when moved to Miami, FL. Becoming Digital Lab Technician, working with CEREC, EXOCAD, 3Shape, Millbox, Hyperdent, and Blue Sky Plan, in 2017 start lecturing in USA, Canada, Mexico, in April 2018 I Joined Blue Sky Bio Team to work in the CADCAM, Clinical Support and Digital Parts Development. Co Owner of CADCAM2U Digital Solutions, and Lecture courses about BlueSkyPlan and digital dentistry.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Surgical Guides for Dummies

February 16, 2022 6:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The object of this webinar is:
Step by step guide for fabricating surgical stents utilizing Blue Sky Plan.

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY.

BlueSkyBio Webinar Presenter

Dott. Luca Borro

BlueSkyBio Webinar Presenter

Uso del software BlueSkyPlan per applicazioni in ortodonzia pediatrica.

Settembre 10, Venerdì : 18:00

Webinar Duration: 1 hour

Course Description

L’oggetto di questa presentazione webinar sarà l’uso del software BlueSkyPlan (modulo ortho) nell’ortodonzia pediatrica.

L’obiettivo dell’evento online è quello di fare una panoramica sulle possibilità offerte dal software per l’ortodonzia digitale nell’età pediatrica. In particolare durante l’evento verranno fatti cenni ad alcune possibilità di modeling ortodontico avanzate rispetto alle funzioni “base” del software. Nello specifico verrà mostrata la possibilità di visualizzare in 3D lo spostamento radicolare con ricostruzione 3D di radici dentali paziente-specifiche in seguito alla progettazione di un setup ortodontico con BlueSkyPlan.

Biosketch: Luca Borro, Ingegnere Biomedico e ricercatore presso il Dipartimento di Diagnostica per Immagini dell’Ospedale Pediatrico Bambino Gesù di Roma.

About Presenter

Relatore:
Dott. Luca Borro

Ingegnere Biomedico esperto di tecnologia 3D in medicina (3d modeling e stampa 3D);
3D Specialist e formatore autorizzato BlueSkyBio per il software 3D “BlueSkyPlan”
Dal 2015 ad oggi 3D Specialist all’interno dell’Unità di Innovazione e Percorsi Clinici dell’Ospedale Pediatrico Bambino Gesù di Roma dove si occupa di supportare il personale medico nelle fasi di ricostruzione e stampa 3D di parti anatomiche da immagini radiologiche finalizzate al planning pre-operatorio.
Laureato in Scienze dell’Architettura con specializzazione sulla modellazione tridimensionale avanzata
Laureando in Ingegneria Medica presso l’Università degli Studi di Roma “Tor Vergata”
Ha studiato Scienze Biologiche indirizzo Sanitario presso l’Università degli studi di Urbino “Carlo Bò”
Autore e amministratore del sito web www.3dbiomodel.it, punto di riferimento italiano per l’utilizzo della tecnologia 3D in odontoiatria;

BlueSkyBio Webinar Presenter

BD. Luca Di Renzo

BlueSkyBio Webinar Presenter

Le Basi Di Blue Sky Plan: Il Flusso Wizard Come, Quando E Perche' Utilizzarlo

June 10, 2021 6:30 PM CET

Webinar Duration: 1 hour

Course Description

L'oggetto di questa presentazione webinar è il flusso Wizard di Blue sky Plan; partiamo dalle basi per capire come funziona e come utilizzare alcuni strumenti del software dall' importazione dei dati fino al disegno della dima chirurgica.
1 CE Credit *CE credit is applicable to US registered dentists only.

About Presenter

Luca Di Renzo è socio di 3DIFIC S.R.L. (start up innovativa ed ex spin-off accademico di scienze biomediche e chirurgiche nella facoltà di Medicina dell’Università di Perugia) nella quale ricopre il ruolo di responsabile sviluppo commerciale e responsabile per il settore dentale e della formazione.
Nel corso di questi anni ha strutturato le attività di 3DIFIC legate al settore dentale con particolare attenzione all' utilizzo delle soluzioni digitali, alla formazione e all' assistenza tecnica su Blue Sky PLan. In questa ottica ha organizzato Attività Didattiche Elettive all' interno del Corso di laurea in Odontoiatria e Protesi dentaria dell' Università degli studi di Perugia; è inoltre Fondatore e Vicepresidente dell' associazione DDA (Digital Dentistry Academy).
Il 13-2-2020 è stato invitato come Relatore dall' ANDI Sezione Provinciale di Perugia su “Esempi di utilizzo della stampa 3D e della progettazione digitale". Dal marzo 2021 3DIFIC è distributore ufficiale di crediti BSP per cui fornisce assistenza sul territorio nazionale.

BlueSkyBio Webinar Presenter

Dr. João Fonseca

BlueSkyBio Webinar Presenter

Digital Design Of A Bone Block Harvesting Guide Using Blueskyplan - Protocol And Recipes

June 6 2021, 10:30 AM Eastern Time

Webinar Duration: 1 hour

Course Description

The object of this webinar presentation is to demonstrate the sequence of steps required to successfully build a surgical guide for cortical bone block harvesting. The webinar will also focus on reverse implant and prosthetic planning ahead of regenerative procedures in order to accurately predict bone augmentation objectives and with that fine tune the guide design for the donor site. The technique and protocol devised in the presentation will allow for a very precise and safe delimitation of the bony window, both assuring the bone block dimensions meet the recipient site criteria and that the bone is cut within safe anatomical margins.

About Presenter

Dr. João Fonseca
João Fonseca graduated with a degree in dental medicine from the Instituto Superior de Ciências da Saúde Egas Moniz (ISCSEM), Portugal, in 2005. Academic Expert in Advanced Dental Sciences of Occlusion by the Danube University, Vienna, Austria, in 2008. Founder of Biomimetic Dentistry Portugal Group in 2013 and Professor at the PostGraduation program in Biomimetic Dentistry at CESPU (Porto) since 2014. Renowned educator in Digital Dentistry and Guided surgery since 2016, has done numerous lectures and courses for many dentists and dental technicians. As an entrepreneur, he and Dr. Andre Simões kickstarted a Portuguese Brand in Digital Dentistry - Digital4all® - in 2020.

BlueSkyBio Webinar Presenter

Dr. Michael Scherer

BlueSkyBio Webinar Presenter

Everyday Removable & Restorative Dentistry with Blue Sky Plan Software

May 23 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description


The object of this webinar presentation is to review using Blue Sky Plan software in restorative and prosthetic dentistry workflows. Emphasis will be placed on everyday restorative dentistry from dentures to crowns and bridges and how it fits into the author’s combined clinical-laboratory practice.

About Presenter

Dr. Michael Scherer is an Assistant Clinical Professor at Loma Linda University, a Clinical Instructor at University of Nevada – Las Vegas, and maintains a practice limited to prosthodontics and implant dentistry in Sonora, California. He is a fellow of the American College of Prosthodontists, has published articles, DVD training series, and full‐online courses related to implant dentistry, clinical prosthodontics, and digital technology with a special emphasis on implant overdentures. As an avid technology & computer hobbyist, Dr. Scherer’s involvement in digital implant dentistry has led him to develop and utilize new technology with CAD/CAM surgical systems, implement interactive CBCT implant planning, and outside of the box radiographic imaging concepts. Dr. Scherer also maintains five YouTube channels: “LearnLOCATOR”, “LearnLODI”, “LearnSATURNO”, “LearnLOCATOR F‐Tx” and “The 3D Dentist”‐ popular YouTube channels on standard and narrow diameter dental implant procedures and digital

BlueSkyBio Webinar Presenter

Odt Zampieri

BlueSkyBio Webinar Presenter

Giusto approccio a BLUESKYPLAN

May 18 2021, 6:00PM CET

Webinar Duration: 1 hour

Course Description

L'oggetto di questa presentazione webinar è scoprire le potenzialità di BSP e come impostare in modo corretto una lavorazione cad.

1- introduzione al software e sue potenzialità comunicative e produttive.
2-importazione di file STL da impronta intraorale
3-utilizzare il bite occlusale
4-pulire il file STL
5-chiudere e realizzare un occlusore stampabile con i file importati.

About Presenter

Francesco Zampieri (Odtzampieri F.B.) è un odontotecnico che nell'arco della carriera lavorativa ha collaborato con svariate aziende del dentale come: Trasformer , Micromedica , Ruthinium , ha sviluppato il prodotto Daicom (fibra di quarzo per riabilitazioni implantari) di cui è divulgatore indipendente .
E' istruttore ufficiale Blueskyplan , istruttore Meshmixer , creatore e amministratore di DIGITALE PER TUTTI pagina F.B. che si occupa di divulgazione per il dentale di software gratuiti Cad e progettazione di Chirurgia guidata e Ortodonzia digitale."

BlueSkyBio Webinar Presenter

Dr Raymond Rophie

BlueSkyBio Webinar Presenter

Blue Sky Plan Denture Design DEMO From Data Acquisition to Export and 3DPrint.

May 16 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description

The objective of the webinar is:

1. Description.
2. The attendee will see a demonstration in a 60 minutes webinar how to.
3. Evaluate correct Models necessary to create digital dentures.
4. Import digital models from a scanner.
5. Clean models, mount them and aligning.
6. Digital teeth wax-up from NEW teeth libraries.
7. Use of filters.
8. Follow the steps to completion of the dentures.
9. Create a denture base and connected teeth set for bonding with different resins.
10. Create a monolithic denture for try in or cutback and pink layering.
11. NEW BOOLEAN operations directly in Blue Sky Plan.
12. Export designed parts.
13. Prepare design parts to print.

About Presenter

Dr. Raymond Rophie
Director Laboratory and CAD/CAM Blue Sky Bio.

Graduated as general dentist in Mexico City 2006, run private practice until 2016 when moved to Miami, FL. Becoming Digital Lab Technician, working with CEREC, EXOCAD, 3Shape, Millbox, Hyperdent, and Blue Sky Plan, in 2017 start lecturing in USA, Canada, Mexico, in April 2018 I Joined Blue Sky Bio Team to work in the CADCAM, Clinical Support and Digital Parts Development. Co Owner of CADCAM2U Digital Solutions, and Lecture courses about BlueSkyPlan and digital dentistry.

BlueSkyBio Webinar Presenter

Dr Raymond Rophie

BlueSkyBio Webinar Presenter

Blue Sky Plan All-In-One Workflow: From Crown To Surgical Guide DEMO

May 2 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description

The attendee will see a demonstration in a 60-90 minutes webinar how to:
1. Import a CBCT DICOM file
2. Import a digital model from a scanner
3. Clean models and predictable aligning
4. Digital wax-up from teeth libraries
5. Plan a restorative driven implant
6. Use Blue Sky Plan abutment libraries
7. Design a screw retained restoration
8. Boolean functions in Crown and Bridge Module to design a custom healing abutment
9. Customized articulated model with Pins
10. Surgical guide design
11. Customize a surgical guide
12. Elaborate a drill report
13. Export designed parts
14. Prepare design parts to print

... a practical webinar for maximizing Blue Sky Plan potential, and prepare for 3D printing.

About Presenter

Dr. Raymond Rophie
Director Laboratory and CAD/CAM Blue Sky Bio.

Graduated as general dentist in Mexico City 2006, run private practice until 2016 when moved to Miami, FL. Becoming Digital Lab Technician, working with CEREC, EXOCAD, 3Shape, Millbox, Hyperdent, and Blue Sky Plan, in 2017 start lecturing in USA, Canada, Mexico, in April 2018 I Joined Blue Sky Bio Team to work in the CADCAM, Clinical Support and Digital Parts Development. Co Owner of CADCAM2U Digital Solutions, and Lecture courses about BlueSkyPlan and digital dentistry.

BlueSkyBio Webinar Presenter

Dr. Melissa D. Shotell

BlueSkyBio Webinar Presenter

Growing Your Practice with Clear Aligners and Blue Sky Bio

April 18 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description

The objective of this webinar is to explore the use of in-office clear aligners in both the general dental setting and orthodontic practice. Positioning your practice for success with in-office clear aligners. Taking complete control of your clear aligner design and fabrication can improve clinical outcomes, reduce treatment time, and make treatment more affordable compared major aligner manufacturing companies. This webinar will discuss how to incorporate the digital workflow for clear aligners into everyday practice.

About Presenter

MS Dr. Melissa Shotell is a Board Certified Orthodontist and practices in a ulti-specialty practice in Sonora, CA focusing on the interplay of Orthodontics and restorative treatment. Dr.Shotell received her DMD at Nova Southeastern University and advanced hospital training a General Practice Residency Certificate from The Ohio State University. After spending years in general practice treating a broad range of patients, Dr. Shotell returned to complete a certificate and master’s degree in Orthodontics from Loma Linda University. At Loma Linda University, Dr. Shotell focused her training on cutting-edge threedimensional imaging technology for diagnosis and treatment planning for interdisciplinary dentistry. Dr. Shotell considers education to be her passion and regularly consults and lectures on dental technology, clear aligner therapy, orthodontics, in-office clear aligners, office efficiency and workflow, and teamwork. Dr. Shotell shares tips and tricks on orthodontics and clear aligners on social media as alignerbee.

BlueSkyBio Webinar Presenter

Dr. Rick Ferguson

BlueSkyBio Webinar Presenter

Is the Lateral Approach Sinus graft dead? Current techniques for predictable guided crestal sinus grafting of most cases.

March 21 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description

The Objective of this webinar presentation is to discuss the role of sinus grafting in implantology with a focus on the guided crestal approach using a new less invasive technique. Diagnoses, treatment planning and red flags will be discussed as well as decision making regarding the crestal vs lateral approach.
We now have the ability to treat most cases with the crestal approach and also use a guided system for the highest level of precision. We will address the materials to be used regarding proper bone grafting materials, membranes and use of bioactive modifiers. Incorporation of the crestal approach sinus lift in the software planning stage will be discussed.
By following specific guidelines and having a thorough understanding of the biologic principles involved it is now possible to reduce treatment time and surgical trauma with the guided crestal approach sinus graft.

About Presenter

Dr. Rick Ferguson
DMD, DABOI, DICOI @Implant Educators Academy
Rick Ferguson lectures throughout the world on a variety of implant surgery and restorative topics. He is the Director of Implant Educators which runs a seven month program teaching general dentists and specialists how to become implantologists. Dr. Ferguson is a Diplomate of the ABOI/ID, Diplomate of the ICOI, an Associate Fellow of the AAID, clinical assistant professor at the University of Florida and a visiting lecturer at the University of Miami. Dr. Ferguson has taught implant dentistry and hands-on bone grafting courses which have been attended by thousands of dentists over the last 20 years. He is currently in private practice in Davie, Florida.

BlueSkyBio Webinar Presenter

Dr. N. Cory Glenn DDS

BlueSkyBio Webinar Presenter

Blue Sky Plan for Restorative Treatment

March 18 2021, 7:00 PM Eastern

Webinar Duration: 1 hour

Course Description

The objective of the webinar is:
Learn all the functions of Blue Sky Bio Crown and Bridge Module
Create digital waxups in BSP
Compare and contrast the available printed material options for restorative dentistry
Explore the unique treatment options that printed materials provide
3d Printed Composite Fillings
Designing Implant restorations in Blue Sky Plan

About Presenter

Hi, my name is Cory Glenn. I’m a dentist, speaker, trainer and tech developer. I live in Winchester, TN where I practiced dentistry for 8 years. During that time, I became known as the “Dental MacGyver” for coming up with creative ways to deliver care more affordably and efficiently. However, in 2015, I developed APL leukemia and had to go on medical leave for treatment. After a year long battle, I made a near full recovery with exception of ongoing back issues that have kept me from being able to return to clinical practice. Now that I am a “dry fingered” dentist, I’ve shifted my focus entirely to teaching and development in the field of digital dentistry. I am the VP of Technology for Blue Sky Bio, a leading implant and software company. I work with an awesome group of people and we are disrupting the dental field by using technology to make dentistry more affordable and efficient. I speak extensively on digital dentistry throughout the world and I also operate a training center in my hometown where I teach other dentists digital workflows and techniques.

BlueSkyBio Webinar Presenter

Dr. Virgil Mongalo

BlueSkyBio Webinar Presenter

4 Simultaneous Full-Arch Implant Placements

February 3 2021, 10:30 PM Eastern

Webinar Duration: 1 hour

Course Description

Watch Dr. Virgil Mongalo during a live-feed of 4 immediate load full-arch placements under IV sedation using the BioMax Implant System.

Includes: Case review, planning, execution, and best practice tips – all by Dr. Virgil Mongalo

About Presenter

Dr. Virgil Mongalo
DMD, DICOI, MAAIP, FICD

Professional experience
Dr. Virgil Mongalo is a pioneer in the field of implant dentistry, having placed over 20,000 implants since opening his private office in South Florida in 1991. He is passionate about replacing lost teeth and giving patients back a beautiful smile. He holds active licenses in Massachusetts, Colorado, Florida and Nicaragua. Dr. Mongalo spends his professional time travelling to Nicaragua and Mexico where he trains USA and Canadian dentists how to perform implant surgeries on under privileged population as part of a Catholic Dental outreach program.

BlueSkyBio Webinar Presenter

Dr. Cory Glenn

BlueSkyBio Webinar Presenter

Bone Supported Surgical Guides and Prosthetics in House

April 30 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

Bone supported surgical guides and prosthetics have gained a lot of popularity in recent years. The extensive planning involved and accuracy in surgery saves the surgeon time and gives more consistent results. However, many of the commercially available options are quite expensive. The goal of this presentation is to show a pragmatic and systematic approach to creating a bone reduction guide, an implant drilling guide, and finally a prosthesis which can be indexed into the proper position on the bone.

About Presenter

Hi, my name is Cory Glenn. I’m a dentist, speaker, trainer and tech developer. I live in Winchester, TN where I practiced dentistry for 8 years. During that time, I became known as the “Dental MacGyver” for coming up with creative ways to deliver care more affordably and efficiently. However, in 2015, I developed APL leukemia and had to go on medical leave for treatment. After a year long battle, I made a near full recovery with exception of ongoing back issues that have kept me from being able to return to clinical practice. Now that I am a “dry fingered” dentist, I’ve shifted my focus entirely to teaching and development in the field of digital dentistry. I am the VP of Technology for Blue Sky Bio, a leading implant and software company. I work with an awesome group of people and we are disrupting the dental field by using technology to make dentistry more affordable and efficient. I speak extensively on digital dentistry throughout the world and I also operate a training center in my hometown where I teach other dentists digital workflows and techniques.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Implants for Life!

April 30 2020, 9:30 AM Eastern

Course Duration: 1 hour

AGD Subject Code:

490

CE: 1

Course Description

Hygienists encouraged to attend!

Dental implants have transformed how we practice dentistry over the past 20 years. They are highly durable, but not without complications.
In this course, we will discuss the most common issues that cause implants to ail and fail, how to treat them, and how to avoid them before they happen.
We will also discuss practical hygiene visit protocols to maintain implants for a lifetime.

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY. He followed that with a residency in general practice dentistry at New York Hospital of Queens and a fellowship in oral and maxillofacial surgery and implantology, also at New York Hospital of Queens. The fellowship program provided Dr. Mikhli with extensive training in both the surgical and prosthetic aspects of implant dentistry. In addition to working in private practice, Dr. Mikhli is a recognized expert in implantology, who lectures extensively on the topic to other dental professionals throughout the Tri-state area. He also runs an in-office mentorship program for general dentists, providing hands-on instruction in implant surgery. Dr. Mikhli is a member of the American Dental Association, the Academy of General Dentistry and the International Congress of Oral Implantologist.

BlueSkyBio Webinar Presenter

Dr. Cory Glenn

BlueSkyBio Webinar Presenter

Template Driven Composite Rehabilitation's

April 29 2020, 1:00 PM Eastern

Course Duration: 1 hour

CE: 1

Course Description

With the current economic situation, more and more people will have difficulty affording comprehensive dental treatment. Composite resin offers an excellent, low cost alternative to traditional crown and bridge treatment. The goal of this course is to cover the treatment planning considerations in planning a full mouth rehab, how to create a digital waxup, and show numerous template driven techniques to quickly restore multiple teeth with composite resin.

About Presenter

Hi, my name is Cory Glenn. I’m a dentist, speaker, trainer and tech developer. I live in Winchester, TN where I practiced dentistry for 8 years. During that time, I became known as the “Dental MacGyver” for coming up with creative ways to deliver care more affordably and efficiently. However, in 2015, I developed APL leukemia and had to go on medical leave for treatment. After a year long battle, I made a near full recovery with exception of ongoing back issues that have kept me from being able to return to clinical practice. Now that I am a “dry fingered” dentist, I’ve shifted my focus entirely to teaching and development in the field of digital dentistry. I am the VP of Technology for Blue Sky Bio, a leading implant and software company. I work with an awesome group of people and we are disrupting the dental field by using technology to make dentistry more affordable and efficient. I speak extensively on digital dentistry throughout the world and I also operate a training center in my hometown where I teach other dentists digital workflows and techniques.

BlueSkyBio Webinar Presenter

Dr. Michael Scherer

BlueSkyBio Webinar Presenter

Avoiding Rookie Mistakes Case Review – Virtual Study Club

April 23 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

730

CE: 1

Course Description

Have you ever see challenging scans or cases to make surgical guides and unsure of what to do?
Would you like to be part of this webinar and treatment plan live with Dr Michael Scherer?
Email us at plan@blueskybio.com and let us know.

This interactive virtual study club will feature highly interactive online learning with clinicians who are looking for tricky cases, those that are difficult to align scans to CBCT, minimal teeth, and more. Join the virtual study club and bring your cases and we will work through cases!

About Presenter

Dr. Michael Scherer is an Assistant Clinical Professor at Loma Linda University, a Clinical Instructor at University of Nevada – Las Vegas, and maintains a practice limited to prosthodontics and implant dentistry in Sonora, California. He is a fellow of the American College of Prosthodontists, has published articles, DVD training series, and full‐online courses related to implant dentistry, clinical prosthodontics, and digital technology with a special emphasis on implant overdentures. As an avid technology & computer hobbyist, Dr. Scherer’s involvement in digital implant dentistry has led him to develop and utilize new technology with CAD/CAM surgical systems, implement interactive CBCT implant planning, and outside of the box radiographic imaging concepts. Dr. Scherer also maintains five YouTube channels: “LearnLOCATOR”, “LearnLODI”, “LearnSATURNO”, “LearnLOCATOR F‐Tx” and “The 3D Dentist”‐ popular YouTube channels on standard and narrow diameter dental implant procedures and digital

BlueSkyBio Webinar Presenter

Dott. Valerio Ramieri

BlueSkyBio Webinar Presenter

Full Digital Workflow In Orthognathic Surgery

April 23 2020, 10:30 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

310

CE: 1

Course Description

The object of this webinar presentation is to share surgical experience in the digital workflow of orthognathic patients.
Full digitization of the workflow is now possible for every patient through the use of photogrammetry, model scan and Cone Beam CT.
This presentation will be a step-by-step from diagnosis to Virtual Surgical Plan.

About Presenter

Dott. Valerio Ramieri is a Maxillo-Facial surgery in Rome, he graduated with the highest honors in Medical School in 2008 and Specialized with highest honors in 2013 in Maxillo-facial surgery.
He accomplished a PhD in new technologies in maxillo-facial surgery. For 5 years has been Assistant Professor at Sapienza Università di Roma.
His main activity is focused in Orthognathic surgery and Cranio-facial deformities.

BlueSkyBio Webinar Presenter

Dr. Virgil Mongalo

BlueSkyBio Webinar Presenter

Basic Implant Prosthodontics: Fixed and Removable

April 22 2020, 1:00 PM Eastern

Course Duration: 1 hour

CE: 1

Course Description

The objective of this course is to teach the participants basic implant prosthodontics. I will divide this presentation into 2 broad areas: (A) crown and bridge on partially edentulous patients, (B) prosthetic on fully edentulous patients (B1) fixed prosthesis utilizing screw retained hybrids and (B2) all acrylic over-dentures supported by free-standing attachments. The educational goal is to present simple and proven clinical techniques in modern implant prosthodontics. These will include understanding of restorative components, discussion on open vs closed tray techniques, discussion of screw retained vs cemented restorations and discussion on individual vs splinted crowns. I will also speak on selection of components according to type of final restoration taking into consideration tissue height, implant angulation and restorative vertical height available.

About Presenter

My name is Virgil Mongalo and I am a General Dentists with a passion for surgeries and restorations in the field of Oral Implantology. This passion led me to enroll in multiple post-graduate surgical and prosthodontics externships that culminated in teaching appointments at Georgia Medical College in the department of Oral and Maxillofacial Surgery, University of Florida department of Advanced Studies and at the University of Miami department of Oral and Maxillofacial Surgery. I am the Chairman of Live Implant Training Institutes in Nicaragua and in Mexico where we have trained 1,200 dentists how to perform free-handed surgeries. I am president of the AAIP-Latin America Society and President of the ICOI-Nicaragua Society. Our educational efforts in the past decade have been supported by Blue Sky Bio implant system.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Sinus Lift 101

April 21 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

In this course, you will:
- Understand the key principles for predictable sinus bone grafting.
- Identify atrophic sinus and relevant anatomy
- Treatment plan crestal vs lateral sinus lift procedures
- Learn to utilize CBCT scans to properly evaluate the sinus
- Learn how to select cases to maximize success at your skill level.
Learn from Dr. Mikhli's 10 year experience with sinus bone grafting (more than 1000 sinus grafts performed).

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY. He followed that with a residency in general practice dentistry at New York Hospital of Queens and a fellowship in oral and maxillofacial surgery and implantology, also at New York Hospital of Queens. The fellowship program provided Dr. Mikhli with extensive training in both the surgical and prosthetic aspects of implant dentistry. In addition to working in private practice, Dr. Mikhli is a recognized expert in implantology, who lectures extensively on the topic to other dental professionals throughout the Tri-state area. He also runs an in-office mentorship program for general dentists, providing hands-on instruction in implant surgery. Dr. Mikhli is a member of the American Dental Association, the Academy of General Dentistry and the International Congress of Oral Implantologist.

BlueSkyBio Webinar Presenter

Dr. Baron Grutter

BlueSkyBio Webinar Presenter

BlueSkyPlan Basics: Indirect Bonding Tray Design for Orthodontic Brackets 102

April 16 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

370

CE: 1

Course Description

The objective of this webinar is to familiarize the viewer with the functionality of the BlueSkyPlan Orthodontic modules, as it relates to traditional brackets and wires. We will discuss two different techniques to approach bracket placement: placing them with a patient specific end in mind AND placing them based on historical averages. By the end of this webinar, the user should be equipped with an understanding sufficient to begin planning their own cases or directing their lab on how they would like their cases planned.

About Presenter

Dr. Baron Grutter attended Graceland University for his undergraduate degree and received his dental degree from the University of Missouri in Kansas City. He has focused his practice around digital dentistry, particularly in the areas of Orthodontics, Implantology, and Cosmetics. Most recently, he was named the project manager of Blue Sky Bio Orthodontics. He spends much of his non-clinical hours refining digital workflows to optimize treatment outcomes and efficiency. You can find many of his free educational videos by following him on YouTube (YouTube.com/BGrutterDDS). He also hosts courses on Digital Dentistry, including: Digital Orthodontics, Guided Surgery, and 3D Printing in Dentistry. He has a true passion for working with and helping his colleagues to master all that digital technologies have to offer the dental field. www.barongrutterdds.com

BlueSkyBio Webinar Presenter

Sam Wainwright

BlueSkyBio Webinar Presenter

Mik Mattyasovszky

Take Control of Your Practice’s Productivity with 3D Printing

April 7 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

550

CE: 1

Course Description

The object of this webinar is to show how to use 3D printing to reduce turnaround times, increase quality control, and get back to full operation as soon as possible. Sam Wainwright and Mik Mattyasovszky will take attendees through the 3D printing workflow and interweave it with business considerations like return on investment and how to best implement these technologies in your practice.

About Presenter

Sam Wainwright, dental product manager at Formlabs, has been in the dental industry for 10+ years helping labs and dentists become more effective with new technology. He most notably has worked for Custom Automated Prosthetics (CAP), Henry Schein, and 3M as they expanded their presence in the industry.

Mik Mattyasovszky, Dental Channel Manager, has worked over the past four years with dentists and dental labs across North America to implement the digital workflow and use it to empower their businesses.

BlueSkyBio Webinar Presenter

Dr.Raúl Ruiz

BlueSkyBio Webinar Presenter

La impresión 3D Chairside

April 6 2020, 6:00 PM

Course Description

Para muchos de nosotros es un mundo completamente nuevo y, a veces, incluso hostil. Intentaremos aclarar todos los aspectos necesarios para que te sientas capaz de poder adentrarte en él con las ideas claras.

About Presenter

Licenciado en Odontología por la Universidad de Barcelona (2011), experto en CAD/CAM e impresión 3D. Con amplia experiencia en impresión 3d aplicada a distintos protocolos odontológicos como mock-ups, cirugía guiada o provisionalización… Raúl Ruiz es trainer en sistemas digitales y nuevas tecnologías aplicadas a la odontología. Mantiene práctica privada en Clínica Hera Dental, ubicada en la localidad de Malgrat de Mar (Cataluña, España)

BlueSkyBio Webinar Presenter

Dr. David Veige

BlueSkyBio Webinar Presenter

Prosthodontically driven tissue supported surgical guides for full arch all on X implants ready to print in 30 minutes

April 6 2020, 4:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

The objective of this webinar presentation is to provide a systematic workflow for data capture in clinic to allow for the accurate and efficient production of a tissue supported surgical guide. The presentation will discuss patient scanning techniques, denture scanning techniques according to the "dual scan" technique. Assessing the patients current prosthodontic envelop to determine ideal tooth positions to allow correct implant planning relative to restorative material and transition line. Linking of the both the patient and denture dicom data. Conversion of the patient denture into a surgical guide. Strategic implant positions for ideal anterior posterior spread. Restorative bridge materials and adaqaute inter occlusal space for the chosen material.

About Presenter

Originally from Toronto Ontario, Canada, David qualified firstly as a dental technician from George Brown College and then as a dentist from the University of Newcastle with a distinction in academic dentistry and the top restorative dentistry prize. He graduated with merit from the University of Warwick with a MSc. degree in Implant Dentistry. He is currently studying a MClinDent at King's College, London in fixed and removable prosthodontics. David lectures both nationally and internationally on all aspects of guided implant surgery and advanced restorative dentistry. He is the director of Smile Designs Dental Laboratory, Harrogate and Smile Designs Implant Studio. His practice is limited to implant dentistry.

BlueSkyBio Webinar Presenter

BlueSkyBio Webinar Presenter

BlueSkyPlan, nivel básico e intermedio.

April 3 2020, 6:00 PM

Course Description

Next Dentistry Team (Dres. Vicente Ferrer, Raúl Ruiz y Jorge Troncoso)

El software por excelencia en cirugía guiada. Nos adentraremos en su uso y funcionamiento, y realizaremos varios casos en directo: desde un implante unitario, hasta un All-on-four a partir de un CBCT y una prótesis completa, pasando por otros casos de dificultad ascendente.

About Presenter

Dr. Vicente Ferrer
Licenciado en Odontología por la Universidad de Murcia (1997), centro en el que se especializó en Implantología, Implantoprótesis y Periodoncia en 2003, y cursó el Máster en Implantología Avanzada (2014). Ferrer es profesor asociado del Departamento de Odontología Integrada del Adulto de la Facultad de Odontología de la Universidad de Murcia desde 2001, así como del Máster en Cirugía Mucogingival, Periodoncia e Implantología de la misma universidad. Mantiene práctica privada en Clínica Ferrer -ubicada en la localidad de Alcantarilla (Murcia, España)- con dedicación preferente a la Implantología.

Dr. Raúl Ruiz
Licenciado en Odontología por la Universidad de Barcelona (2011), experto en CAD/CAM e impresión 3D. Con amplia experiencia en impresión 3d aplicada a distintos protocolos odontológicos como mock-ups, cirugía guiada o provisionalización… Raúl Ruiz es trainer en sistemas digitales y nuevas tecnologías aplicadas a la odontología. Mantiene práctica privada en Clínica Hera Dental, ubicada en la localidad de Malgrat de Mar (Cataluña, España)

Dr. Jorge Troncoso
Cirujano Dentista por la Universidad de Talca (Chile), con especialidad en Implantología Buco Maxilofacial por la Universidad de Chile y en Rehabilitación Oral por la Universidad de San Sebastián (Chile). El Dr. Troncoso es también diplomado en cirugía Plástica Periodontal por la Universidad del Desarrollo y realizó un periodo de formación e investigación post doctorado en Morfología en la Universidad CEU Cardenal Herrera (Valencia, España). En el área docente, fue académico ayudante del Departamento de Prótesis de la Universidad de Chile y actualmente es académico Postgrado Rehabilitación Oral (Universidad de San Sebastián). Autor de artículos científicos en revistas nacionales e internacionales y dictante de conferencias a nivel nacional e internacional, es miembro de la Academia Bluesky Latinoamérica y jefe del Departamento de Odontoestomatología del Hospital Santa Cruz (Chile).

BlueSkyBio Webinar Presenter

BlueSkyBio Webinar Presenter

Trending topics in guided surgery with BlueSkyBio

April 2 2020, 6:00 PM

Course Description

Next Dentistry Team (Dres. Vicente Ferrer, Raúl Ruiz y Jorge Troncoso)

La cirugía guiada está en pleno apogeo. Empezar a usarla es solo cuestión de tiempo. Pero siempre surgen dudas... El equipo Next Dentistry Team esclarecerá en esta presentación los aspectos más candentes y controvertidos de una manera amena y didáctica.

About Presenter

Dr. Vicente Ferrer
Licenciado en Odontología por la Universidad de Murcia (1997), centro en el que se especializó en Implantología, Implantoprótesis y Periodoncia en 2003, y cursó el Máster en Implantología Avanzada (2014). Ferrer es profesor asociado del Departamento de Odontología Integrada del Adulto de la Facultad de Odontología de la Universidad de Murcia desde 2001, así como del Máster en Cirugía Mucogingival, Periodoncia e Implantología de la misma universidad. Mantiene práctica privada en Clínica Ferrer -ubicada en la localidad de Alcantarilla (Murcia, España)- con dedicación preferente a la Implantología.

Dr. Raúl Ruiz
Licenciado en Odontología por la Universidad de Barcelona (2011), experto en CAD/CAM e impresión 3D. Con amplia experiencia en impresión 3d aplicada a distintos protocolos odontológicos como mock-ups, cirugía guiada o provisionalización… Raúl Ruiz es trainer en sistemas digitales y nuevas tecnologías aplicadas a la odontología. Mantiene práctica privada en Clínica Hera Dental, ubicada en la localidad de Malgrat de Mar (Cataluña, España)

Dr. Jorge Troncoso
Cirujano Dentista por la Universidad de Talca (Chile), con especialidad en Implantología Buco Maxilofacial por la Universidad de Chile y en Rehabilitación Oral por la Universidad de San Sebastián (Chile). El Dr. Troncoso es también diplomado en cirugía Plástica Periodontal por la Universidad del Desarrollo y realizó un periodo de formación e investigación post doctorado en Morfología en la Universidad CEU Cardenal Herrera (Valencia, España). En el área docente, fue académico ayudante del Departamento de Prótesis de la Universidad de Chile y actualmente es académico Postgrado Rehabilitación Oral (Universidad de San Sebastián). Autor de artículos científicos en revistas nacionales e internacionales y dictante de conferencias a nivel nacional e internacional, es miembro de la Academia Bluesky Latinoamérica y jefe del Departamento de Odontoestomatología del Hospital Santa Cruz (Chile).

BlueSkyBio Webinar Presenter

Dr. Daniel Domingue

BlueSkyBio Webinar Presenter

Complete digital approach to Full Arch Guided Surgery and Prosthetic's

April 2 2020, 10:30 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

To perform implant dentistry at an optimal level in full arch cases its important to understand and use some easily implemented technology we all have access to. Planning, performing, and providing temp and final prosthesis predictable enough for all your cases is within your 'wheel house'.

About Presenter

Dr. Daniel Domingue graduated from Louisiana State University School of Dentistry and obtained his DDS degree in 2007. After Dental School he went on to a three year in advanced training at Brookdale University Hospital and Medical Center in New York City, he served as Chief Resident of the Dental and Oral Surgery Department. His training included one year in General Practice Residency and two years in Dental Implantology Fellowship. During these years, he was awarded the Certificate of Achievement from the American Academy of Implant Dentistry for outstanding leadership in Implant Dentistry, a Fellowship from the International Congress of Oral Implantologists, and an Associate Fellowship of the American Academy of Implant Dentistry in New York City. After residency and during his first years in private practice Dr. Domingue was awarded the Diplomate from the American Board of Oral Implantology in Las Vegas, NV, the highest award possible for a general dentist practicing implantology. He was also recognized as the youngest recipient of this award in the entire world. He was later given a Mastership and Diplomate award from the International Congress of Oral Implantology in New York City for his outstanding work in Implant Dentistry and a Fellowship award from The American Academy of Implant Dentistry in Phoeniz, AZ. Dr. Domingue is a member of the American Dental Association as well as the Acadiana District Dental Association, American Academy of General Dentistry, and is the Founder and President of Acadiana Southern Society. Dr. Domingue currently resides in Lafayette, LA with his wife, Megan, and daughter, Danielle. He practice here with his partner/Uncle, Dr. Jerome Smith DDS, in an implant referral practice (http://www.acadianadentistry.com/). He is past president of the Acadiana District Dental Association, and current president of Acadiana Southern Society. He is a member of AAID, ICOI, ABOI, ADA, LDA, and ASS.

BlueSkyBio Webinar Presenter

Dr. Baron Grutter

BlueSkyBio Webinar Presenter

Clear Aligner Design 101

April 2 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

370

CE: 1

Course Description

The objective of this webinar presentation is to demonstrate the efficiency of In-Office Clear Aligner Design. Whether you are designing yourself or outsourcing that aspect, you will learn the ins-and-outs of the BlueSkyPlan Orthodontic software. This will help you to have more predictable clinical results. Also, enabling you to delegate as much as possible while still maintaining a high degree of control and reliability. Armed with this grasp of clear Aligner Therapy, you will have the opportunity to save tens of thousands of dollars each year. And, you will no longer be at the mercy of long wait times and difficult to communicate with technicians.

About Presenter

Dr. Baron Grutter attended Graceland University for his undergraduate degree and received his dental degree from the University of Missouri in Kansas City. He has focused his practice around digital dentistry, particularly in the areas of Orthodontics, Implantology, and Cosmetics. Most recently, he was named the project manager of Blue Sky Bio Orthodontics. He spends much of his non-clinical hours refining digital workflows to optimize treatment outcomes and efficiency. You can find many of his free educational videos by following him on YouTube (YouTube.com/BGrutterDDS). He also hosts courses on Digital Dentistry, including: Digital Orthodontics, Guided Surgery, and 3D Printing in Dentistry. He has a true passion for working with and helping his colleagues to master all that digital technologies have to offer the dental field. www.barongrutterdds.com

BlueSkyBio Webinar Presenter

Dr Raymond Rophie

BlueSkyBio Webinar Presenter

Temporary and Final Restorations Design over Digital Titanium Bases and Scanbodies Using Blue Sky Plan CAD (Crown and Bridge) Module

March 31 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

The object of this webinar presentation is to fully walk through the Blue Sky Plan CAD module workflow in 7 steps from the model acquisition to the final screw retained restoration design.

About Presenter

Graduated as general dentist in Mexico City 2006, run private practice until 2016 when moved to Miami, FL. Becoming Digital Lab Technician, working with CEREC, EXOCAD, 3Shape, Millbox, Hyperdent, and Blue Sky Plan, in 2017 start lecturing in USA, Canada, Mexico, in April 2018 I Joined Blue Sky Bio Team to work in the CADCAM, Clinical Support and Digital Parts Development. Co Owner of CADCAM2U Digital Solutions, and Lecture courses about BlueSkyPlan and digital dentistry.

BlueSkyBio Webinar Presenter

Helen B. Bloch, Esq.

BlueSkyBio Webinar Presenter

Employment Law And Your Dental Practice, Brushing Up On What’s New

March 30 2020, 10:30 AM Eastern

Course Duration: 1 hour

AGD Subject Code:

550

CE: 1

Course Description

The object of this webinar presentation is to discuss some of the timely employment laws that affect all employers irrespective of size, as no employer is exempt from complying with applicable local, state, or federal employment laws and regulations. Issues involving leaves of absence, sick leave, accommodating disabilities, pregnancy, wage requirements and nuances that may apply to pandemics such as COVID-19 will be addressed. For instance, questions like the following will be tackled: What is considered a disability under disability laws like the ADA? Does a virus fall under the category of a disability ? Can I take my employee’s temperature to determine whether the employee is sick? What can I ask an employee about a disability or illness? Can I force my employee to use paid time off during an office shut down? Do I even have to pay my employee in the event the office is closed? What if my employee works from home, do I have to reimburse expenses incurred by an employee in performing tasks for my office? Some of the laws to be touched on to answer these questions include the Americans with Disabilities Act (ADA), Family Medical Leave Act (FMLA), Families First Coronavirus Response Act, and Fair Labor Standards Act (FLSA).

About Presenter

In 2007, Helen Bloch founded the Law Offices of Helen Bloch, P.C., a general practice firm that is a Certified Female Business Enterprise. In the employment and business context, Helen drafts contracts, advises on business-start-up, and represents clients on all sides of the employment relationship- individual employees, managers, or employers. Routinely Helen negotiates and counsels clients on employment agreements, including non-competition, confidentiality, and severance agreements. Also, she drafts employment handbooks and various policies and procedures. Helen will advise businesses on best practices, including their sexual harassment training obligations. Helen has lectured on topics such as legal issues affecting small businesses and legal rights and obligations from multiple sides of the employer-employee relationship. Currently she is a faculty lecturer for Financial Poise in its Protecting your Employee Assets series. For the past two years she has been selected for inclusion in Super Lawyers in the area of employment law. Helen belongs to several civic and professional organizations. She is President of the Decalogue Society of Lawyers, which awarded her the Presidential Citation in 2015 and the Intra Society Award of Merit in 2001. She serves on the Alliance of Bar Associations, where she assists in screening judicial candidates. Her other bar association memberships include the Illinois chapter of the National Employment Lawyers Association, Women’s Bar Association of Illinois and the Illinois State Bar Association. An active National Association of Women B usiness Owner’s (NAWBO) member, Helen leads NAWBO’s Lincoln Park Business Exchange Group.

BlueSkyBio Webinar Presenter

Dr. Russell Schafer

BlueSkyBio Webinar Presenter

Making Quality PPO Dentures In House

March 30 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

670

CE: 1

Course Description

In this webinar, I want to go over a case that I did in December of 2019 and presented online in January 2020. A friend had denture patient who had all his teeth removed in August 2019 but only had the money for one set of dentures and he decided to wait for six months of full healing. However, as the holidays approached he did want some lower cost dentures, so my friend asked me to help so that she could keep the lab bill low. I will work you through the way that I would build dentures from the impressions, to the scanning with a desktop scanner, to building a bite rims, and then to choosing the teeth and printing the denture as well as giving you the STLs and Blue Sky Plan files so that you can compare what you create to what we gave him.

About Presenter

I love dentures and I think I found my niche for dentures because they are the ultimate people pleasers. I think most dentists find dentures to be frustrating and difficult they are full mouth rehabilitations but it must be done on a budget. It is routine for a PPO to pay the same fee for a full denture as they do for a crown even though the full denture requires more appointments along and a much higher lab fee. I believe that with proven digital technology that we can build dentures faster and cheaper without sacrificing quality. My goal has been to figure out a way to build a 600 dollar denture profitably that satisfies both esthetics and function for most patients.

BlueSkyBio Webinar Presenter

Dr Raymond Rophie

BlueSkyBio Webinar Presenter

Temporary and Final Restorations Design over Natural Teeth Using Blue Sky Plan CAD (Crown and Bridge) Module

March 26 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

The object of this webinar presentation is to fully walk through the Blue Sky Plan CAD module workflow in 7 steps from the model acquisition to the final restoration design.

About Presenter

Graduated as general dentist in Mexico City 2006, run private practice until 2016 when moved to Miami, FL. Becoming Digital Lab Technician, working with CEREC, EXOCAD, 3Shape, Millbox, Hyperdent, and Blue Sky Plan, in 2017 start lecturing in USA, Canada, Mexico, in April 2018 I Joined Blue Sky Bio Team to work in the CADCAM, Clinical Support and Digital Parts Development. Co Owner of CADCAM2U Digital Solutions, and Lecture courses about BlueSkyPlan and digital dentistry.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Part 3: Implant startup

March 25 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

· Understand the biological basis of implant surgery · Learn the Principles of atraumatic extraction – the foundation of implant dentistry · Apply clinical uses of allografts, xenografts and synthetic grafts · Learn to read Cone Beam CT scans with the anatomical knowledge you already have as a clinical dentist · Crown-Down implant planning utilizing Cone Beam and CAD technology · Increase revenue simple yet effective internal implant marketing Bonus: Implant Hygiene: How to maintain implants for a lifetime (Great for doctors and hygienist!) Great start for beginners as well as review for seasoned veterans. We will focus on doing a lot with a little. When everyone gets out of this period, there will be a LOT of dentistry to be done, but the general public will have less disposable income to do it with. Preparing now will position you to come out ahead. Every crisis gives us an opportunity.

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY. He followed that with a residency in general practice dentistry at New York Hospital of Queens and a fellowship in oral and maxillofacial surgery and implantology, also at New York Hospital of Queens. The fellowship program provided Dr. Mikhli with extensive training in both the surgical and prosthetic aspects of implant dentistry. In addition to working in private practice, Dr. Mikhli is a recognized expert in implantology, who lectures extensively on the topic to other dental professionals throughout the Tri-state area. He also runs an in-office mentorship program for general dentists, providing hands-on instruction in implant surgery. Dr. Mikhli is a member of the American Dental Association, the Academy of General Dentistry and the International Congress of Oral Implantologist.

BlueSkyBio Webinar Presenter

Dr. Rob Mikhli

BlueSkyBio Webinar Presenter

Part 2: Atraumatic Extraction and Bone grafting

March 24 2020, 1:00 PM Eastern

Course Duration: 1 hour

AGD Subject Code:

690

CE: 1

Course Description

·Understand the biological basis of implant surgery · Learn the Principles of atraumatic extraction – the foundation of implant dentistry · Apply clinical uses of allografts, xenografts and synthetic grafts · Learn to read Cone Beam CT scans with the anatomical knowledge you already have as a clinical dentist · Crown-Down implant planning utilizing Cone Beam and CAD technology · Increase revenue simple yet effective internal implant marketing Bonus: Implant Hygiene: How to maintain implants for a lifetime (Great for doctors and hygienist!) Great start for beginners as well as review for seasoned veterans. We will focus on doing a lot with a little. When everyone gets out of this period, there will be a LOT of dentistry to be done, but the general public will have less disposable income to do it with. Preparing now will position you to come out ahead. Every crisis gives us an opportunity.

About Presenter

Dr. Robert Mikhli, DDS is a top-rated dentist providing dental implants at Precision Implant Care, located in Brooklyn, NY’s Midwood neighborhood and New York City. Dr. Mikhli utilizes state-of-the-art surgical approaches and technology to restore oral health and enhanced aesthetics to patients with damaged, diseased or missing teeth. Precision Implant Care is equipped with the latest large-screen monitors, lasers, surgical instruments and a Cone Beam CAT scan machine, that offers the most advanced 3-D x-ray images available today. Dr. Mikhli is praised for both for his expert skill and ability to put patients at ease, including those who have avoided going to the dentist in years. Originally from Cleveland, Dr. Mikhli has made New York his home since attending Yeshiva University in Manhattan, where he graduated in 2004 with a BA in Economics. Dr. Mikhli went on to earn his dental degree from Stony Brook School of Dental Medicine in Stony Brook, NY. He followed that with a residency in general practice dentistry at New York Hospital of Queens and a fellowship in oral and maxillofacial surgery and implantology, also at New York Hospital of Queens. The fellowship program provided Dr. Mikhli with extensive training in both the surgical and prosthetic aspects of implant dentistry. In addition to working in private practice, Dr. Mikhli is a recognized expert in implantology, who lectures extensively on the topic to other dental professionals throughout the Tri-state area. He also runs an in-office mentorship program for general dentists, providing hands-on instruction in implant surgery. Dr. Mikhli is a member of the American Dental Association, the Academy of General Dentistry and the International Congress of Oral Implantologist.

bottom of page